Go to documentation repository
Page History
...
The GRELE object sends events presented in the table. Procedure is started when the corresponding event appearsoccurs.
Event | Description |
"OFF" | Relay Off.is off |
"ON" | Relay On.is on |
"SIGNAL_LOST" | Connection lost. |
List of commands and parameters for the GRELE object is presented in the following table:
Command –—command description | Parameters | Description |
"ON" - —enable relay. | - | - |
"OFF" - —disable relay. | - | - |
"SETUP" – —settings for relay. | chan <> | Output number (0 – 150–15). |
flags<> | Flags. | |
name<> | Object name. |
Properties of the GRELE object are shown in the table.:
Properties of the GRELE object | Description of properties |
ID<> | Object ID. |
PARENT_ID<> | Parent object ID. |
REGION_ID<> | Region ID. |
The GRELE object can be in the following states:
State of the GRELE object | State description |
"ON" | Relay ON.is on |
"OFF" | Relay OFF.is off |
"DETACHED_ON" | Connection lost. |
"DETACHED_OFF" | Connection lost. |
Overview
Content Tools