Go to documentation repository
Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.
Previous page Next page
The GRELE object corresponds to the Relay system object.
The GRELE object sends events presented in the table. Procedure is started when the corresponding event appears.
Event | Description |
"OFF" | Relay Off. |
"ON" | Relay On. |
"SIGNAL_LOST" | Connection lost. |
List of commands and parameters for the GRELE object is presented in the following table:
Command – command description | Parameters | Description |
"ON" - enable relay. | - | - |
"OFF" - disable relay. | - | - |
"SETUP" – settings for relay. | chan <> | Output number (0 – 15). |
flags<> | Flags. | |
name<> | Object name. |
Properties of the GRELE object are shown in the table.
Properties of the GRELE object | Description of properties |
ID<> | Object ID. |
PARENT_ID<> | Parent object ID. |
REGION_ID<> | Region ID. |
The GRELE object can be in the following states:
State of the GRELE object | State description |
"ON" | Relay ON. |
"OFF" | Relay OFF. |
"DETACHED_ON" | Connection lost. |
"DETACHED_OFF" | Connection lost. |
Overview
Content Tools