Versions Compared

Old Version 1

changes.mady.by.user Alena Kniazeva

Saved on

compared with

New Version Current

changes.mady.by.user Alina Luchkina

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To configure the object of the Rozetatech integration module, do the following:

  1. Go to the settings panel of the Rozetatech object.
    Image Modified
  2. In
    3. the 
  3. the App key
    4.  field
  4.  field, enter the unique access key to the Rozatatech service.
  5. In
    6. the 
  6. the Clear states automatically field, select the Yes value to have all Rozetatech devices automatically return to their initial state. By default, the No value is selected.
  7. In
    8. the 
  8. the Client ip for
    9. ping 
  9. ping field, specify the IP address of the device to check the internet connection (ping).
  10. In
    11. the 
  11. the Connection timeout, minutes field, specify in minutes the time interval after which the device will go offline if there are no messages from it.
  12. In the Number of objects created
    13.  field
  13.  field, enter the number of child objects you want to create for the Rozetatech object that is equal to the number of sensors connected in the native software.
  14. In
    15. the 
  15. the Ping the client device field, select the Yes value to check the internet connection (ping) of the device. By default, the No value is selected.
  16. In
    17. the 
  17. the Port
    18.  field
  18.  field, specify the port number that will be used to access the Rozetatech service.
  19. In the
    20.  
  20. Proxy events to root field, set the Yes value to receive events from child devices to the Rozetatech object. By default, the No value is selected.
  21. In the S/N device
    22.  field
  22.  field, specify the serial number of the Rozetatech object
    23. .In the Time to switch to off minutes field, specify in minutes the time interval after which the device will go offline if there are no messages from it
  23. .
  24. Click the Apply button to save the changes.
  25. Click
    26. the 
  26. the Image Modified
    27.  button
  27.  button and
    28. select 
  28. select Download configuration
    29.  from
  29.  from the drop-down list to automatically download the configuration and build the hardware tree.
  30. Click the Apply button.

Configuration of the object of the Rozetatech integration module is complete. As a result, a hardware tree will be built:
Image RemovedImage Added