To configure the object of the Rozetatech integration module, do the following:

  1. Go to the settings panel of the Rozetatech object.
  2. In the App key field, enter the unique access key to the Rozatatech service.
  3. In the Clear states automatically field, select the Yes value to have all Rozetatech devices automatically return to their initial state. By default, the No value is selected.
  4. In the Client ip for ping field, specify the IP address of the device to check the internet connection (ping).
  5. In the Connection timeout, minutes field, specify in minutes the time interval after which the device will go offline if there are no messages from it.
  6. In the Number of objects created field, enter the number of child objects you want to create for the Rozetatech object that is equal to the number of sensors connected in the native software.
  7. In the Ping the client device field, select the Yes value to check the internet connection (ping) of the device. By default, the No value is selected.
  8. In the Port field, specify the port number that will be used to access the Rozetatech service.
  9. In the Proxy events to root field, set the Yes value to receive events from child devices to the Rozetatech object. By default, the No value is selected.
  10. In the S/N device field, specify the serial number of the Rozetatech object.
  11. Click the Apply button to save the changes.
  12. Click the  button and select Download configuration from the drop-down list to automatically download the configuration and build the hardware tree.
  13. Click the Apply button.

Configuration of the object of the Rozetatech integration module is complete. As a result, a hardware tree will be built:

  • No labels