Page History

...

To search for events, do the following:

1. Select From the Event type drop-down list, select the type of events that you want to find (1).
   

   Event	Description
   All alarms	The search finds moments in the archive containing all types of alarms
   Non-critical alarm	The search finds moments in the archive containing non-critical alarms
   Critical alarm	The search finds moments in the archive containing critical alarms
   Unclassified alarm	The search finds moments in the archive containing unclassified alarms
   False alarm	The search finds moments in the archive containing false alarms
   Triggering	The search finds moments when detectors generated events
   Recording start	The search finds the beginning and end of recordings from the specified camera regardless of the initiator

2. Select an In the Initiator field, select the event initiator from the list (2). Info

   title	Note

   An event initiator can be an operator, a camera input, or any camera detector of a camera, or any activated detector that is activated in the system can act as the event initiator. The search results shows show the moments in the archive containing that contain the events that were are started by the initiator. When you search for any type of event alarm or for a the Triggering type of event when by searching in the lists of faces or lists of LP(see Faces (AxxonNet), Faces (AxxonData)) or LPs (see LPs (AxxonNet), LPs (AxxonData)), select Real-time recognition as an intiator initiator with a specific list. For To do this, enable the the Check in lists parameter in the settings of the Face detectors and License plate detectors (see see Checking in lists of LPs and faces, Checking in lists of facesLPs).
3. If necessary, click the button and add more similar search conditions.
4. Set the search interval (see Setting a search interval).

5. Click the Search button.

   Note
   title Attention!
   To search in the embedded storage of an IP device (for example, a camera or recorder) for events from the embedded detectors, you must synchronize the server and IP device (see Limitations of Axxon One). If you don't perform synchronization, there can be discrepancies between the time of detector events and the time of frames in the archive. Once started, the search can be stopped at any time. To do this, click the Stop button that appears instead of the Search button.

...