Page History

To configure the object of the Server "Sigur" integration  integration module, do the following:

1. Go to the settings panel of the Server "Sigur" object.
   Image Modified
   
2. In the Login field, enter the username used to
login
3. log in to the
Client software of the Server "Sigur" ACS
4. Sigur software.
   The default value is Admin.
5. In the Password field, enter the user password
used
6. used to log in to
login to
7. the
Client software of the Server "Sigur" ACS
8. Sigur software.
9. In the Address field, enter the IP address of
the Server "Sigur"
10. the Sigur software server.
11. In the Card type field, select the data format of the access cards:
    1. Wiegand-26 (by default),
    2. Wiegand-34.
12. In the Database password field, enter the password to access the database installed in the Sigur software (see official reference documentation).
    

    Info
    title

Click the

13. Note

    If you use the Sigur software of a version earlier than 1.1.1.53 or newer than 1.6.6.42 and select the set the password (automatically) option in the Database access password window, you must leave the Database password field blank. Database version (non-editable field). The default value is 5000.

14. Click the Apply button to save the changes.
15. Click
the 
16. the Image Modified
 button
17.  button and
select 
18. select Download configuration
 from
19.  from the drop-down list to automatically download the configuration and build the hardware tree.
20. Click the Apply button.

Configuration Configuring the object of the Server "Sigur" integration module is complete. As a result, a hardware tree will be built:
Image RemovedImage Added