Page History

As a rule, IP devices allow processing one or more video signals depending on the type of the device in useused.

Every Each IP device used for the video input is registered in Axxon PSIM by creating and configuring the Video capture device object. The Video capture device objects are created in on the Hardware tab on the basis of the Computer object.

When the you create the Video capture device objects are created, you must set the following parameters must be set for every each IP device:

1. From the Type drop-down list (1), select the IP device vendor.

2. If you want to detect the model and firmware should be detected of the connected IP device automatically, go to step 3. The Model and Firmware fields will be are filled in automatically after you apply the connection settings are applied.
   To select set the model and firmware manually, do the following:
   

   1. From the Model drop-down list (2), select the IP device model.

      Info
      title Note.
      If the required model is not isn't in the list, it is not isn't integrated. Consider connecting IP device via one of the standard protocols.

   2. From the Firmware drop-down list (3), select the firmware number on the device.
3. In the IP address field (4), specify enter the network address assigned to the IP device. Information For information on how to assign IP addresses is given in , refer to Assigning network addresses to IP devices.

4. In the Port field (5), specify the port number (TCP/IP) port number used for video transmission.

   Info
   title Note
   In some cases you might also need to specify the RTSP port—see Features of configuring ONVIF or Hikvision IP devices behind NAT.

5. To log in to the Web server of the IP device, enter the corresponding data in the Name and Password fields (6).

6. If you want to use the settings configured with the help of specified using the Web server or another software of the IP device, set the the Use device settings checkbox (7). In this case, the overlapping crossing settings configured applied on the settings panel of the Camera object will be in Axxon PSIM are ignored.

   Info
   title Note
   If video the camera settings specified with the help of using the IP device software are not used aren't applied in Axxon PSIM or used are applied partially, then clear we recommend clearing the Use device settings checkbox and configure configuring a video camera on the settings panel of the the Camera object.

7. Click the Apply button.

After logging in you log into Axxon PSIM, you must assign the values to the Channel number parameters of the Camera object corresponding to the numbers of the camera connection channels of the video cameras to the IP device should be given to the Channel number parameters of the Camera object.