Page History

To configure the object of the Server "Sigur" integration module, do the following:

1. Go to the settings panel of the Server "Sigur" object.
   Image Modified
   
2. In the Login field, enter the username used to
login
3. log in to the
Client software of the Server "Sigur" ACS
4. Sigur software.
   The default value is Admin.
5. In the Password field, enter the
password used to login
6. user password used to log in to the
Client software of the Server "Sigur" ACS
7. Sigur software.
8. In the Address field, enter the IP address of
the Server "Sigur"
9. the Sigur software server.
10. In the Card type field, select the data format of the access cards:
    1. Wiegand-26 (by default),
    2. Wiegand-34.
Click the
11. In the Database password field, enter the password to access the database installed in the Sigur software (see official reference documentation).
    

    Info
    title Note
    If you use the Sigur software of a version earlier than 1.1.1.53 or newer than 1.6.6.42 and select the set the password (automatically) option in the Database access password window, you must leave the Database password field blank. Database version (non-editable field). The default value is 5000.

12. Click the Apply button to save the changes.
13. Click the Image Modified button and select Download configuration from the drop-down list to automatically download the configuration and build the hardware tree.
14. Click the Apply button.

Configuration Configuring the object of the Server "Sigur" integration module is complete. As a result, a hardware tree will be built:
Image Modified