Page History

...

1. Open the required layout (see Configuring layouts).
2. Select the required camera.
3. Click the Search button in the lower right corner of the surveillance window (see Search in archive).
4. Set a search interval (see Setting a search interval).
5. Click the button.
6. Select Events search. 
7. Specify the search criteria listed in the table:
   

   Criterion	Value	Description
   Events search
   Event type		Select the required event type from the drop-down list
   	All alarmsRecording start	The search finds moments in the archive containing all types of alarmsthe beginning and end of recordings from the specified camera regardless of the initiator
   	Detector triggers	The search finds moments when detectors generated events
   	All alarmsSuspicious situation	The search finds moments in the archive containing suspicious situationsall types of alarms
   	Confirmed alarm	The search finds moments in the archive containing confirmed alarms
   	Unclassified alarmSuspicious situation	The search finds moments in the archive containing unclassified alarmssuspicious situations
   	False alarm	The search finds moments in the archive containing false alarms
   	Detector triggersUnclassified alarm	The search finds moments when detectors generated events	Recording start	The search finds the beginning and end of recordings from the specified camera regardless of the initiatorin the archive containing unclassified alarms
   Initiator		Select an event initiator from the drop-down list. An operator, input, camera detector, or any detector activated in the system can act as an event initiator. The search result displays the moments in the archive that the initiator started. When you search for any type of alarm or for the Detector triggers type to search in the lists of faces (see Faces (AxxonNet), Faces (AxxonData)) or license plates (see LPsLicense plates (AxxonNet), LPs (AxxonData)), select Real-time recognition as an initiator with a specific list. To do this, enable the Check in lists parameter in the settings of the Face detectors and License plate detectors (see Checking in lists of faces, Checking in lists of LPs)
   Comment		Enter text to search for specific events that had comments added when alarms triggered. You can filter the events by the Comment criterion only for the following types: All alarms Confirmed alarm Suspicious situation False alarm

   
   
8. Click the Search button. If necessary, click the button to add additional similar search conditions.
   

   Note
   title Attention!
   To search in the embedded storage of an IP device (for example, a camera or recorder) for events from the embedded detectors, you must synchronize the server and IP device (see Axxon One requirements). If you don't perform synchronization, there can be discrepancies between the time of detector events and the time of frames in the archive. You can stop the search at any time. To do this, click the Stop button that replaces the Search button.

...