Title: Searching, adding, configuring, and removing IP devices  
Author: Alina Luchkina 14.10.2022
Last Changed by: Alena Kniazeva 14.11.2025
Tiny Link: (useful for email) https://doc.austingis-mx.com/confluence/x/GQ2xDg
Export As: Word · PDF  
Incoming Links
Axxon One 2.0 (english) (33)
    Page: Connecting cameras via the GB/T28181 protocol
    Page: Starting the client
    Page: Adding the ONVIF Profile M embedded detection tools
    Page: UNIVIEW KB-1100 specific configuration features
    Page: Axxon One setup checklist and best practices
    Page: Camera
    Page: Automatic copying of data from local Servers to a centralized Server
    Home page: Documentation
    Page: Generic Drivers (General device, generic)
    Page: Receiving audio and video from connected USB devices
    Page: SL USBIO board
    Page: The Server object
    Page: Configuring and using the RTP Stream Device driver to receive multicast streams
    Page: Configure virtual inputs
    Page: The IP Server object
    Page: Special features of configuring AGRG-IO-16/8-WD-DS card in Axxon One
    Page: Configuring connection of multi-channel devices
    Page: Configuring connection of single-channel devices
    Page: Event source object
    Page: Saving an archive when replacing a video signal device
    Page: Configuring Commax Complex Server via virtual IP server
    Page: 1+1 cluster configuration
    Page: General Information about CCTV Keyboards
    Page: Creating cameras
    Page: Embedded ONVIF analytics
    Page: Setting up Tibbo relay/loop boards
    Page: Features of configuring and working with cameras connected via ONVIF
    Page: Configuring Virtual IP Servers
    Page: Embedded vehicle speed measurement radar
    Page: Configuring Commax Complex Server via Event Source
    Page: Configuring virtual cameras
    Page: How do I check if my camera is integrated with Axxon One?
    Page: Configuring the ONVIF server
ACFA (english) (31)
    Page: Adding the Server OPC UA integration module
    Page: Adding the Mavili integration module
    Page: Adding the Server "Sigur" integration module
    Page: Adding the Unipos7000 controller integration module
    Page: Adding the APACS integration module
    Page: Adding the ActiveMQ broker integration module
    Page: Adding the Protege integration module
    Page: Adding the Sigur 2.0 integration module
    Page: Adding the Hartmann Odyssey integration module
    Page: Adding the CORTEX WinSC integration module
    Page: Adding the SALTO integration module
    Page: Adding the Satel INTEGRA integration module
    Page: Adding the Rozetatech integration module
    Page: Adding the Paxton integration module
    Page: Adding the Satel2 ETHM-A integration module into configuration
    Page: Adding the RISCO Panel integration module
    Page: Adding the Modbus master integration module
    Page: Adding the BioStar 2 integration module
    Page: Adding the Opc Da integration module
    Page: Adding the SNMP Agent integration module
    Page: Adding the Hikvision IP Receiver Pro integration module
    Page: Adding the MQTT broker integration module
    Page: Adding the Axis integration module
    Page: Adding the BACnet Server integration module
    Page: Adding the Zk PUSH Server integration module
    Page: Configuring the Vauban Visor integration module
    Page: Adding the FaceID integration module
    Page: Adding the Vanderbilt SPC integration module into configuration
    Page: Adding the KeyScan Aurora integration module
    Page: Adding the Emulator ACFA integration module
    Page: Adding the DEA Security Fusion P2P integration module into configuration
Hierarchy
Parent Page
    Page: Devices
Children (1)
    Page: Bulk creation of IP devices
Labels
There are no labels assigned to this page.