Setting up HikVision interlock groups

To configure a HikVision interlock group, do the following:

1. Go to the settings panel of the Hikvision Interlock Group object , which is created on the basis of the HikVisi on 26X object.
   
   
2. From the Number drop-down list (1), select the interlock group number ID corresponding to this group's ID in the HikVision controller.
3. In the Door pane (2), check the boxes for the relevant HikVision doors.
4. Click the Apply button (5) to save your settings.

The HikVision interlock group is now configured.