Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

SIP-devices of security intercom terminals are to be properly configured for correct working of the Intercom Subsystem.

Note

StreamLabs (jpg) and StreamLabs (wxv) vendors can be in use instead of SIP-devices (e.g. WaveServer WH1501 video server). The firmware of 2.0.0.0 version and above is to be applied.

Note.

Configuring of SIP-devices is performed through the Web-interface.

Information about configuring the SIP-device can be found in the official documentation for this device.

Configuring of SIP-device is performed the following way:

  1. change IP-address of SIP-device if it’s needed;
  2. set parameters of SIP protocol;
  3. for GAI – Tronics HelpPoint: add the Intercom Subsystem Server of security intercom terminals to the SIP-device contact list;
  4. for GAI – Tronics HelpPoint: set the call direction (to the Intercom Subsystem Server) while clicking the call button on the SIP-device;
  5. for LinkSys SPA-2102: configure IP video server;
  6. for Beward DS06/DS91406M/DSN23215PS: set default symbols for relay commands.
  • No labels
Error formatting macro: children: java.lang.NullPointerException