Setting up the video recording parameters

It is possible to record a video signal received from a LP recognition video camera during a predetermined time interval. If this function is enabled, the recording starts automatically when the LPR channel recognizes an LP number. 

To enable the function of automatic video recording, do the following:

1. Go to the LPR channel object settings panel, corresponding to the activated module (see Activating the software module used for identifying the plates).
   
   

2. Set the Auto recording checkbox to enable the recording of the video upon recognizing a LP number (1).

3. In the field next to the checkbox (2), specify for how many seconds the video should be recorded after LP number recognition.

   Note

   Zero (0) in this field means that the recording starts at the moment of LP recognition and continues indefinitely.

4. Click the Apply button (3).

The auto recording setup is complete.