The Traffic analysis object settings panel

The settings panel of the Traffic analysis object includes the following interface elements.

The description of the interface elements of the Traffic analysis object is given in the table.

№	Parameter name	Method of settings the parameter value	Parameter description	Representation	Default value	Value range
1	The Select cameras group
1	Select cameras	Select the value from the drop-down list	Select a camera for the Traffic analysis module	List of available Camera objects	-	Depends on the number of available Camera objects

The Detection settings tab

№	Parameter name	Method of settings the parameter value	Parameter description	Representation	Default value	Value range
1	The Markings settings group
1	Set markings	Click the button	Specifies the road markings	-	-	-
2	The Events group
	Available	Automatically	List of events available in the Traffic analysis module	List of events available in the Traffic analysis module	All possible events for the Traffic analysis module	Depends on the number of available event of the Traffic analysis module
	Selected	Automatically	List of events used in the Traffic analysis module	List of events selected in the Traffic analysis module	-	Depends on the number of available event of the Traffic analysis module
	>	Click the button	Adds the events selected in the Available field to the Selected field	-	-	-
	>>	Click the button	Adds all events in the Available field to the Selected field	-	-	-
	<	Click the button	Deletes the selected events from the Selected field	-	-	-
	<<	Click the button	Deletes all events from the Selected field	-	-	-

The Analytics settings tab

№	Parameter name	Method of settings the parameter value	Parameter description	Representation	Default value	Value range
1	The Traffic jam group
	min. number of vehicles	Enter the value into the field	Minimum number of vehicles at which the Traffic jam event occurs	Non-negative integer	3	>0
	max. vehicle speed	Enter the value into the field	Maximum speed of vehicles at which the Traffic jam event occurs	Km/h	5	1–255
	registration time	Enter the value into the field	Time in minutes during which the Traffic jam event occurs		1
2	The Speed drop group
	min. number of vehicles	Enter the value into the field	Minimum number of vehicles at which the Speed drop event occurs		3
	% of speed drop	Enter the value into the field	Drop in vehicle speed as a percentage at which the Speed drop event occurs	%	1	1–100
	min. speed	Enter the value into the field	Minimum speed of a vehicle in km/h on this road section that is used to calculate the speed drop and register the Speed drop event	Km/h	5	1–255
	max. speed	Enter the value into the field	Maximum speed of a vehicle in km/h on this road section that is used to calculate the speed drop and register the Speed drop event	Km/h	100	1–255
	checking interval	Enter the value into the field	Time interval in seconds between traffic speed measurements	Second	1	1–60
3	The Road accident group
	threshold	Enter the value into the field	Total weight of attributes, above which a road accident is registered	Non-negative integer	20	>0
	max. stop time	Enter the value into the field	Maximum time in seconds for vehicles to stop in the danger area/surveillance area	Seconds	180	>=0
	Weight of vehicle stopping in area	Enter the value into the field	Weight of an attribute when a vehicle stops in the danger area, crosses this area, slows down in this area, and stays in it longer than the time specified in the max. stop time field	Non-negative integer	13	0–value in the threshold field
	Weight of vehicle stopping	Enter the value into the field	Weight of an attribute when a vehicle stops in the surveillance area (for example, on the road), crosses this area, slows down in this area, and stays in it longer than the time specified in the max. stop time field	Non-negative integer	7	0–value in the threshold field
	Weight of people next to vehicle	Enter the value into the field	Weight of an attribute when a pedestrian is detected next the stopped vehicle in the danger area, depending on the position of the camera, it can be 3-5 meters	Non-negative integer	7	0–value in the threshold field
	Weight of vehicle boxes intersection	Enter the value into the field	Weight of an attribute of the vehicle boxes intersection. The attribute triggers if at least one vehicle has a speed greater than 25 km/h	Non-negative integer	5	0–value in the threshold field
	Weight of hard acceleration	Enter the value into the field	Weight of an attribute, at which there is a sudden change of speed that is typical when vehicles crash into each other	Non-negative integer	7	0–value in the threshold field
4	The Entering the oncoming lane group
4	min. angle	Enter the value into the field	Minimum angle of deviation from the direction of vehicle movement in degrees, at which the Entering the oncoming lane event occurs	Non-negative integer or fractional number	0	0–180
5	The Speeding group
	speed limit	Enter the value into the field	Maximum allowed vehicle speed on this road section in km/h. If this speed is exceeded, the Speeding event occurs	Km/h	10	1–255
	interval	Enter the value into the field	Time interval in seconds between vehicle speed measurements	Second	3	1–60
6	The Lost cargo group
	min. validity	Enter the value into the field	Minimum validity as a percentage, at which the Lost cargo event occurs	%	1	1–100
	min. width	Enter the value into the field	Minimum width of a cargo	Meter	1	>0
	max. width	Enter the value into the field	Maximum width of a cargo	Meter	1000	>0
	min. height	Enter the value into the field	Minimum height of a cargo	Meter	1	>0
	max. height	Enter the value into the field	Maximum height of a cargo	Meter	1000	>0

Page tree

Documentation for Auto PSIM 1.0.1.