In order to configure the general settings of Satel Ethma Output object, do the following:

  1. If additional events are to be created on state change, set Emulate extra events to Yes and configure the following options:
    1. Define the message for high state in Info for high state field.
    2. Define the message for low state in Info for low state field.
  2. Select the value for the Output logic field: Normal, Remember state, or Activate for the programmed time.
  3. If the logic of events needs to be reversed, set Reverse events to Yes.
  4. If the logic of displayed icons needs to be reversed, set Reverse icon to Yes.

Configuring the Satel Ethma Output object is complete.

  • No labels