Configuring the Satel Ethma One Wire object

In order to configure the general settings of Satel Ethma One Wire object, do the following:

1. The Enable extra events for analog input option creates additional state messages. If it is set to Yes, do the following:
   
   
   1. Define the message for alarm state in the Alarm state message field.
   2. Define the message for warning state in the Warning state message field.
   3. Define the message for normal state in the Normal state message field. 
2. Define the High threshold value.
3. Define the Low threshold value.
4. In the Buffer field, define the buffer value.
5. If the logic of events needs to be reversed, set Reverse events to Yes.
6. If the logic of displayed icons needs to be reversed, set Reverse icon to Yes.

Configuring the Satel Ethma One Wire object is complete.