In order to configure the Satel Ethma Input Ac object, do the following:

  1. If additional events are to be created on state change, set Emulate extra events to Yes and configure the following options:
    1. Define the message for high state in Info for high state field.
    2. Define the message for low state in Info for low state field.
  2. Select the type of displayed notifications in Notification type field: Active/Inactive, Normal/Failure, or Normal/Alarm.
  3. In the Require the operator to clear the alarm from map field, select one of two possible states:
    1. No—Alarm message expires automatically upon object state change.
    2. Yes—The alarm message is displayed on the map until manually cleared by the operator.
  4. In Reverse events field, set the value to Yes if the logic of displayed events is to be reversed, or to No if the logic is to be kept as-is.
  5. If the logic of the displayed icons needs to be reversed, set Reverse icon to Yes. Otherwise, set the value to No.

Configuring the Satel Ethma Input Ac object is complete.

  • No labels