Operations with sensors

Sensor status indication

Identification of the sensor icon on the map depends on the current operating mode and sensor status, as well as the type of intrusion sensor. The sensor is always in two states at the same time, so its icon on the map is always blinking, and the state icons change in equal time intervals. State icons for different sensor types are shown below. The state that is written to the dbo.STATES database is given in the dbo.state column.

Heat sensor:

Glass sensor:

Ceiling sensor:

Window sensor:

Infrared sensor:

Smoke sensor:

Reed sensor:

For the Sensor security device with the switch on operation mode, an alarm event is generated when the sensor closes. For the Sensor security device with the switch off operation mode, an alarm event is generated when the sensor opens.

If the sensor is armed, then when the sensor is switched on/switched off, depending on the setting of the operation mode, an "Alarm" event is generated (see Creating and configuring the Sensor system object). If the sensor is disarmed, then the "Closed"/"Open" events are generated correspondingly. If the connection between Axxon PSIM and the sensor is lost, the "Connection lost" event is generated.

Sensor control

You can control the sensor via the function menu of the given sensor icon shown on the map.

You can access the function menu of the sensor by right-clicking the corresponding sensor icon.

The feature menu of the sensor provides access to various operating functions of the sensor.