Page History

Configuration of Satel2 ETHM-A integration module is done via performed by configuring two system objects:   Satel Ethma TCP Service object and Satel Ethma child object.

Configuring Satel Ethma TCP Service object

To configure the Satel Ethma TCP Service object, do the following:

1. Select the main Satel Ethma TCP service object.
   
2. In the Polling time [s] field, enter the value specified when configuring the Satel2 ETHM-A universal monitoring module via GX Soft tool.
3. In the VMS IP address, specify server IP address used to connect Axxon One VMS with the Satel2 ETHM-A universal monitoring module.
4. In the VMS Port, specify the port used to connect Axxon One VMS with the Satel2 ETHM-A universal monitoring module.
   

   Note
   title Attention!
   Please make Make sure the firewall is configured to allow traffic from the Satel2 ETHM-A universal monitoring module to Axxon One server.

   
   

   Info
   title Note
   The values need to be kept consistent with the ones specified when configuring the Satel2 ETHM-A universal monitoring module via GX Soft tool (see : Preparing the Satel2 ETHM-A universal monitoring module to work with Axxon One).

5. Press Click the Apply button to save the settings. 
6. Press the Click the  button, and from the drop-down list select Download configuration from device.
   
   
7. Press Click the Apply button.

As a result, Satel Ethma object will be created.

...

Configuring Satel Ethma child object

In order to configure To configure Satel2 Ethma object, do the following:

1. In the Device IP field, enter the Satel2 ETHM-A universal monitoring module IP address.
2. In the Input AC number field, specify the amount of AC inputs configured in Satel2 ETHM-A universal monitoring module.
3. In the Number of 1-Wire sensors field, specify the amount of sensors configured in Satel2 ETHM-A universal monitoring module.
   

   Info
   title Note
   In order to determine the amount of inputs and outputs to be selected, please refer to the the Input/Output preview section on the page :  Preparing the Satel2 ETHM-A universal monitoring module to work with Axxon One

4. In the Number of inputs field, specify the amount of inputs configured in Satel2 ETHM-A universal monitoring module.
5. In the Number of outputs field, specify the amount of outputs configured in Satel2 ETHM-A universal monitoring module. 
6. Press Click the Apply button to save the settings.
7. Navigate Go to the Satel Ethma TCP Service object.
8. Press the Click the  button, and from the drop-down list select Download configuration from device.
9. Press Click the Apply button.

As a result, the available inputs, outputs and sensors will be added to the Satel Ethma object device tree.

...